The adjacent picture shows a sign with aluminium DMR bracing complete with brackets mounted on standard 2"NB posts. The brackets allow both horizontal and vertical adjustment. This greatly aids the installation of the sign as precise spacing of the poles is not required. However you need to make sure the poles are vertical and in a straight line especially when more than two poles are needed.

We need to know the height from the ground to the base of the sign so we can calculate the number and size of poles to maintain correct wind loading on the sign.

The DMR bracing is bonded to the sign panel with VHB double sided tape, there are no rivets or screws to mar the face of your sign.

Standard DMR bracket as used on the sign above. Available to suit 50mm, 65mm, 80mm, 90mm and 100mm N/B posts.

Single sided bracket for single 50mm N/B post. Suitable for signs up to 500mm wide.

Frisbee bracket for single or back to back mounting on 50mm N/B post when brackets can not be slid over the pole.

Double sided bracket for mounting signs back to back on single 50mm N/B post.